AH-6 800 size

AH-6

Body length: 1464mm
Length incl. rotors: 1980mm
Width: 590mm
Height: 645mm
Main rotor diameter 1570mm
Main blade length: 700mm
Tail rotor diameter: 280mm
Tail blade length: 45mm
Main shaft diameter: 12mm
Tail shaft diameter: 5mm
Spindle diameter: 8mm
Main blade count: 5
Tail blade count: 2/4
Drive gear ratio: 1:13.8:4.7
Motor:* 1x 750MX 450KV brushless outrunner , 12S capable
Speed controller:* 1x 120A brushless, 12S capable
Servo:* 3x metal gear cyclic, 1x metal gear tail servo
Battery:* 44.4V 5000mAh 35C
Flight time: 5 minutes
Takeoff weight: 8000g
Flight Stabilization:* 3 axis flybarless gyro
Radio Control:* min. 6 channel with pitch and throttle curves

Description:
Robans new 800 size MD-500E is now available.
Super Scale locates the cockpit exactly at the right spot, the mechanics are built into the engine compartment, just like on a real helicopter.
The fuselage MD-500E stands out through the detailed scaled down shape. This unique scale look and details stun and apperances are of a real helicopter.

 

Features:

• Five Blade Rotorhead and scale carbon fiber rotor blades included
• Two Tail Blade Head and scale carbon fiber tail blades included
• Complete four seated scale cockpit
• Complete built in / preinstalled position lighting system (controllable via aux channel)
• Special CCPM mechanics built in the top section, as on a real helicopter
• Use of 750MX standard equipment (12S battery, 450KV motor), fly with your existing parts
• Take off weight of 8kg (about the double than a 700 3D helicopter)
• 1750mm long, exact 1/8 scale
• Product comes preassembled and requires very few work to mobilize it

The below pictures show a mechanic that was flown a total of 80 flights, or about 450 minutes of total operation time.
Please note the marginal wear on the gears.

Download manual