AH-6 800 size


Body length: 1464mm
Length incl. rotors: 1980mm
Width: 590mm
Height: 645mm
Main rotor diameter 1570mm
Main blade length: 700mm
Tail rotor diameter: 280mm
Tail blade length: 45mm
Main shaft diameter: 12mm
Tail shaft diameter: 5mm
Spindle diameter: 8mm
Main blade count: 5
Tail blade count: 2/4
Drive gear ratio: 1:13.8:4.7
Motor:* 1x 750MX 450KV brushless outrunner , 12S capable
Speed controller:* 1x 120A brushless, 12S capable
Servo:* 3x metal gear cyclic, 1x metal gear tail servo
Battery:* 44.4V 5000mAh 35C
Flight time: 5 minutes
Takeoff weight: 8000g
Flight Stabilization:* 3 axis flybarless gyro
Radio Control:* min. 6 channel with pitch and throttle curves

Robans new 800 size MD-500E is now available.
Super Scale locates the cockpit exactly at the right spot, the mechanics are built into the engine compartment, just like on a real helicopter.
The fuselage MD-500E stands out through the detailed scaled down shape. This unique scale look and details stun and apperances are of a real helicopter.



• Five Blade Rotorhead and scale carbon fiber rotor blades included
• Two Tail Blade Head and scale carbon fiber tail blades included
• Complete four seated scale cockpit
• Complete built in / preinstalled position lighting system (controllable via aux channel)
• Special CCPM mechanics built in the top section, as on a real helicopter
• Use of 750MX standard equipment (12S battery, 450KV motor), fly with your existing parts
• Take off weight of 8kg (about the double than a 700 3D helicopter)
• 1750mm long, exact 1/8 scale
• Product comes preassembled and requires very few work to mobilize it

The below pictures show a mechanic that was flown a total of 80 flights, or about 450 minutes of total operation time.
Please note the marginal wear on the gears.

Download manual

Powered by Spearhead Software Labs Joomla Facebook Like Button