600 size UH-1N

Motor: 1700KV
ESC: 80A+
Battery: 6S 5000mAh
Length: 1460mm
Width: 410mm
Height: 320mm
Weight: 3000g

All you need is a flying Trex 600ESP or Chaos 600 torque tube model.That's right, the Bell UH-1 Twin Huey kit incorporates a torque tube drive tail system. The first of its kind. Just like the real helicopters, this drive system is extremely reliable, maintenance free and is extremely quick to install. No more adjusting, tightening belts, and lubricating drive systems. This is a plug n play system and is a dream to install.The special designed side frames are designed to offer 2 unique features.1. To lower the transmission allowing for the torque tube to travel thru the lower tail boom of the helicopter. This has always been an issue with mostly military helicopters.2. Probably the most revolutionary design in scale helicopters, these frames allow the entire mechanical system to be tucked up inside the dog house just like the real helicopters. This allows for a truly scale helicopter. Normally the mechanics would take up the entire fuselage area, leaving no room for cockpits, rear seats etc.. That's all changed with RC Aerodyne's new frame design.
* Note, This does not fit the Trex 600 Pro EFL models Most of the work is done for you.Pre-drilled holes for easy install of landing gear. All wood work is installed.Beautifully painted fiberglass fuselage Scale cockpit is completely hand assembled and painted for you. All you need to do is just slide it in. No more stickers, each cockpit is hand painted with raised details and instruments.* Cockpit sold separately. Power set up: Because the Bell UH-1N Twin Huey is a 2 blade helicopter, there is no need to change any configuration within the mechanics. If you have a healthy flying 600 helicopter, you will not need to upgrade or change anything. Standard 600 set up is a 1100 kv out runner 40mm motor 80-100 amp esc 6s 5000 or higher mah battery pack with a " C " rating of 25 or higher.Accessory:

  • Fully painted Fiber Glass scale fuselage x 1
  • Transparent canopy cover x 2
  • Horizontal stabilizer x 1
  • Landing gear x 3
  • Weaponry Set
  • Mounting skids Pack x 1
  • Elevated tail Torque tube system x1
  • Screw Pack x 1
Powered by Spearhead Software Labs Joomla Facebook Like Button

Buy the 222